PGI User Forum
 SearchSearch   MemberlistMemberlist     RegisterRegister   ProfileProfile    Log inLog in 

CUDA-x86.

failed: Permission denied
Goto page 1, 2  Next
 
Post new topic   Reply to topic    PGI User Forum Forum Index -> Accelerator Programming
View previous topic :: View next topic  
Author Message
SWL_EGGBABY



Joined: 16 Dec 2009
Posts: 31

PostPosted: Mon May 06, 2013 12:56 am    Post subject: failed: Permission denied Reply with quote

when i build a transpose example cuda program in k20c , pgi vs 13.4with license, the enable cuda is set to YES ,the cuda emulation is set NO.

show output from:build
Compiling Project ...
SourceFile1.cuf
failed: Permission denied
unlink("C:\Users\jfliu\AppData\Local\Temp\pgfortran5d8asb06CXrzLb.s") SourceFile1.cuf
PVFProject14 build failed.

why? please help me ,thank you!
Back to top
View user's profile
mkcolg



Joined: 30 Jun 2004
Posts: 6129
Location: The Portland Group Inc.

PostPosted: Tue May 07, 2013 11:04 am    Post subject: Reply with quote

Hi SWL_EGGBABY,

Hmm. This looks similar to the error you posted a few years ago. In that case, there was a compiler error which cause this message. Like before, can you please add the verbose flag (-v) to your command options (Project Properties->Fortran->Command Line-> Additional Options) and then send the full output of the build log to PGI Customer Service (trs@pgroup.com)?

Thanks,
Mat
Back to top
View user's profile
SWL_EGGBABY



Joined: 16 Dec 2009
Posts: 31

PostPosted: Thu May 09, 2013 11:48 pm    Post subject: Reply with quote

I have send the build log to the trs@pgroup.com. but there is no reply.
thank you !
Back to top
View user's profile
mkcolg



Joined: 30 Jun 2004
Posts: 6129
Location: The Portland Group Inc.

PostPosted: Fri May 10, 2013 9:13 am    Post subject: Reply with quote

Quote:
I have send the build log to the trs@pgroup.com. but there is no reply.
I don't see your message in the TRS mailbox. It may have gotten caught in our sometimes overly aggressive spam filter. I'll send you an email directly.

- Mat
Back to top
View user's profile
SWL_EGGBABY



Joined: 16 Dec 2009
Posts: 31

PostPosted: Mon May 13, 2013 1:10 am    Post subject: Reply with quote

The mailbox @w.cn can not use at all, i send the message @163.com. so you can not see it
now i send the output log there:

SourceFile1.cuf

d:\pgi2013\win64\13.4\bin\pgfortran.exe -Hx,123,8 -Hx,123,0x40000 -Hx,0,0x40000000 -Mx,0,0x40000000 -Hx,0,0x20000000 -g -Bstatic -Mbackslash -Mcuda -Mfree -I"d:\pgi2013\win64\13.4\include" -I"d:\PGI2013\Microsoft Open Tools 11\include" -I"D:\Windows Kits\8.0\Include\shared" -I"D:\Windows Kits\8.0\Include\um" -Minform=warn -module "x64\Debug" -o "x64\Debug\SourceFile1.obj" -v -c "C:\Users\jfliu\Desktop\chengxu\juzhen chenfa\juzhen chenfa\SourceFile1.cuf"

Command exit code: 2

Command output: [ 0 inform, 0 warnings, 0 severes, 0 fatal for mmul_mod 0 inform, 0 warnings, 0 severes, 0 fatal for mmul_kernel 0 inform, 0 warnings, 0 severes, 0 fatal for mmul 0 inform, 0 warnings, 0 severes, 0 fatal for matmul PGF90/x86-64 Windows 13.4-0: compilation successful failed: Permission denied d:\pgi2013/win64/13.4/bin\pgf901.exe "C:\Users\jfliu\Desktop\chengxu\juzhen chenfa\juzhen chenfa\SourceFile1.cuf" -debug -x 120 0x200 -opt 0 -inform warn -nohpf -nostatic -quad -x 15 2 -x 49 0x400004 -x 51 0x20 -x 57 0x4c -x 58 0x10000 -x 124 0x1000 -x 120 0x80000000 -x 59 4 -x 124 0x400 -x 19 0x400000 -x 119 0x8800000 -x 57 0x7b0000 -x 58 0x78031040 -x 119 0x610400 -x 120 0x80000000 -x 59 4 -x 15 2 -x 49 0x100 -x 48 5376 -stdinc "d:\pgi2013/win64/13.4/include;D:/PGI2013/Microsoft Open Tools 11/include/sys;D:/PGI2013/Microsoft Open Tools 11/include;D:/Windows Kits/8.0/Include/shared;D:/Windows Kits/8.0/Include/um" -def _M_AMD64 -def _MT -def _WIN32 -def __WIN32 -def __WIN32__ -def _WIN64 -def __WIN64 -def __WIN64__ -def __x86_64__ -def __X86_64__ -def __unaligned= -def _INTEGRAL_MAX_BITS=64 -def __extension__= -def __amd64__ -def __SSE__ -def __MMX__ -def __SSE2__ -def __SSE3__ -def __SSSE3__ -def fastcall= -def __PGI_TOOLS11 -idir d:\pgi2013\win64\13.4\include -idir "d:\PGI2013\Microsoft Open Tools 11\include" -idir "D:\Windows Kits\8.0\Include\shared" -idir "D:\Windows Kits\8.0\Include\um" -def _CUDA -freeform -x 137 1 -x 180 0x4000000 -x 189 8 -x 176 0x140000 -x 177 0x0202007f -vect 48 -y 54 1 -x 123 8 -x 123 0x40000 -x 0 0x40000000 -x 0 0x20000000 -x 49 0x1000 -x 124 0x40 -x 137 1 -x 176 0x100 -x 186 0x10000 -x 176 0x100 -x 186 0x20000 -x 176 0x100 -x 176 0x100 -x 189 4 -freeform -moddir x64\Debug -modexport C:\Users\jfliu\AppData\Local\Temp\pgfortran3bCeyburX-PRxQ.cmod -modindex C:\Users\jfliu\AppData\Local\Temp\pgfortran4c8eyb0B77ll2o.cmdx -output C:\Users\jfliu\AppData\Local\Temp\pgfortran2a8eyb06HfmOHd.ilm d:\pgi2013/win64/13.4/bin\pgf902.exe C:\Users\jfliu\AppData\Local\Temp\pgfortran2a8eyb06HfmOHd.ilm -fn "C:\Users\jfliu\Desktop\chengxu\juzhen chenfa\juzhen chenfa\SourceFile1.cuf" -debug -x 120 0x200 -opt 0 -inform warn -x 51 0x20 -x 120 0x80000000 -x 59 4 -x 19 0x400000 -x 28 0x40000 -x 119 0x4a10400 -x 122 0x40 -x 123 0x1000 -x 127 0x15 -x 129 0x10 -quad -y 80 0x1000 -x 80 0x10800000 -tp nehalem -x 70 0x8000 -x 122 1 -x 125 0x20000 -x 120 0x10 -x 124 0x400 -x 119 0x400000 -x 120 0x80 -y 15 2 -x 57 0x3b0000 -x 58 0x48000000 -x 15 2 -x 49 0x100 -astype 0 -x 137 1 -x 180 0x4000000 -x 189 8 -x 176 0x140000 -x 177 0x0202007f -x 124 1 -x 0 0x40000000 -x 124 0x40 -x 137 1 -x 180 0x4000000 -x 176 0x140000 -x 177 0x0202007f -x 176 0x100 -x 186 0x10000 -x 176 0x100 -x 186 0x20000 -x 176 0x100 -x 176 0x100 -x 189 4 -x 189 8 -cmdline "+pgfortran C:\Users\jfliu\Desktop\chengxu\juzhen chenfa\juzhen chenfa\SourceFile1.cuf -Hx,123,8 -Hx,123,0x40000 -Hx,0,0x40000000 -Mx,0,0x40000000 -Hx,0,0x20000000 -g -Bstatic -Mbackslash -Mcuda -Mfree -Id:\pgi2013\win64\13.4\include -Id:\PGI2013\Microsoft Open Tools 11\include -ID:\Windows Kits\8.0\Include\shared -ID:\Windows Kits\8.0\Include\um -Minform=warn -module x64\Debug -o x64\Debug\SourceFile1.obj -v -c" -asm C:\Users\jfliu\AppData\Local\Temp\pgfortran5dCeybu6wjdjb-.s pgfortran-Fatal-f902 completed with exit code -1073741819 Unlinking C:\Users\jfliu\AppData\Local\Temp\pgfortran2a8eyb06HfmOHd.ilm Unlinking C:\Users\jfliu\AppData\Local\Temp/pgfortran2a8eyb06HfmOHd.dbg Unlinking C:\Users\jfliu\AppData\Local\Temp\pgfortran3bCeyburX-PRxQ.cmod Unlinking C:\Users\jfliu\AppData\Local\Temp\pgfortran4c8eyb0B77ll2o.cmdx Unlinking C:\Users\jfliu\AppData\Local\Temp\pgfortran5dCeybu6wjdjb-.s unlink("C:\Users\jfliu\AppData\Local\Temp\pgfortran5dCeybu6wjdjb-.s") ]

--------------------------------------------------------------------------------
Back to top
View user's profile
Display posts from previous:   
Post new topic   Reply to topic    PGI User Forum Forum Index -> Accelerator Programming All times are GMT - 7 Hours
Goto page 1, 2  Next
Page 1 of 2

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © phpBB Group