PGI User Forum
 SearchSearch   MemberlistMemberlist     RegisterRegister   ProfileProfile    Log inLog in 

Free OpenACC Webinar

pgaccelinfo prints wrong cuda cores

 
Post new topic   Reply to topic    PGI User Forum Forum Index -> Accelerator Programming
View previous topic :: View next topic  
Author Message
jinsoo kim



Joined: 25 Sep 2004
Posts: 2

PostPosted: Sat May 12, 2012 6:04 pm    Post subject: pgaccelinfo prints wrong cuda cores Reply with quote

Dear PGI Users,

new Kepler Nvidia GTX-680 has 8 X 192 = 1,536 cuda cores, but pgaccelinfo prints 256 only. so, I cannot utilize GTX-680 using PGI accelerator well.
Is there any workaround ?

1. pgaccelinfo prints as below.
$ pgaccelinfo
CUDA Driver Version: 4020
NVRM version: NVIDIA UNIX x86_64 Kernel Module 295.49 Mon Apr 30 23:46:33 PDT 2012

Device Number: 0
Device Name: GeForce GTX 680
Device Revision Number: 3.0
Global Memory Size: 2146762752
Number of Multiprocessors: 8
Number of Cores: 256
Concurrent Copy and Execution: Yes
Total Constant Memory: 65536
Total Shared Memory per Block: 49152
Registers per Block: 65536
Warp Size: 32
Maximum Threads per Block: 1024
Maximum Block Dimensions: 1024, 1024, 64
Maximum Grid Dimensions: 2147483647 x 65535 x 65535
Maximum Memory Pitch: 2147483647B
Texture Alignment: 512B
Clock Rate: 705 MHz
Execution Timeout: Yes
Integrated Device: No
Can Map Host Memory: Yes
Compute Mode: default
Concurrent Kernels: Yes
ECC Enabled: No
Memory Clock Rate: 3004 MHz
Memory Bus Width: 256 bits
L2 Cache Size: 524288 bytes
Max Threads Per SMP: 2048
Async Engines: 1
Unified Addressing: Yes
Initialization time: 9122 microseconds
Current free memory: 2034229248
Upload time (4MB): 2930 microseconds (1724 ms pinned)
Download time: 3801 microseconds (1845 ms pinned)
Upload bandwidth: 1431 MB/sec (2432 MB/sec pinned)
Download bandwidth: 1103 MB/sec (2273 MB/sec pinned)
-----------------------------

2. CUDA example prints as below:
./deviceQueryDrv
[deviceQueryDrv] starting...

CUDA Device Query (Driver API) statically linked version
There is 1 device supporting CUDA

Device 0: "GeForce GTX 680"
CUDA Driver Version: 4.2
CUDA Capability Major/Minor version number: 3.0
Total amount of global memory: 2047 MBytes (2146762752 bytes)
( 8) Multiprocessors x (192) CUDA Cores/MP: 1536 CUDA Cores
GPU Clock rate: 706 MHz (0.71 GHz)
Memory Clock rate: 3004 Mhz
Memory Bus Width: 256-bit
L2 Cache Size: 524288 bytes
Max Texture Dimension Sizes 1D=(65536) 2D=(65536,65536) 3D=(4096,4096,4096)
Max Layered Texture Size (dim) x layers 1D=(16384) x 2048, 2D=(16384,16384) x 2048
Total amount of constant memory: 65536 bytes
Total amount of shared memory per block: 49152 bytes
Total number of registers available per block: 65536
Warp size: 32
Maximum number of threads per multiprocessor: 2048
Maximum number of threads per block: 1024
Maximum sizes of each dimension of a block: 1024 x 1024 x 64
Maximum sizes of each dimension of a grid: 2147483647 x 65535 x 65535
Texture alignment: 512 bytes
Maximum memory pitch: 2147483647 bytes
Concurrent copy and execution: Yes with 1 copy engine(s)
Run time limit on kernels: Yes
Integrated GPU sharing Host Memory: No
Support host page-locked memory mapping: Yes
Concurrent kernel execution: Yes
Alignment requirement for Surfaces: Yes
Device has ECC support enabled: No
Device is using TCC driver mode: No
Device supports Unified Addressing (UVA): Yes
Device PCI Bus ID / PCI location ID: 1 / 0
Compute Mode:
<Default>
[deviceQueryDrv] test results...
PASSED
---------------------------------------


Any comments are welcomed.

Best regards,
Jin-Soo Kim

----------------------------------------
kjs2000@konkuk.ac.kr
Back to top
View user's profile
sslgamess



Joined: 23 Nov 2009
Posts: 35

PostPosted: Sat May 12, 2012 11:47 pm    Post subject: Reply with quote

http://www.pgroup.com/userforum/viewtopic.php?t=3184&sid=c4a2d600cf0b71e7b64205352fa20ce4
Back to top
View user's profile
jinsoo kim



Joined: 25 Sep 2004
Posts: 2

PostPosted: Wed May 16, 2012 7:23 am    Post subject: reply from developer has arrived. Reply with quote

Here is reply from PGI support.

" Kepler boards will not be supported until our 12.6 release in June. "
Back to top
View user's profile
Display posts from previous:   
Post new topic   Reply to topic    PGI User Forum Forum Index -> Accelerator Programming All times are GMT - 7 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © phpBB Group